Grillah Mercedes A35 Front Number Plate clip

Grillah Number Plate Clip Kit in BLACK for Mercedes A35

This design is IPO approved - 6088560

This Kit consists of everything you need to affix 1 UK Number Plate. 

Contents Incuded:

2 - Registration Clips.

2 - Cavity Mounts.

2 - Self tapping screws.

2 - Grey bumper plugs

2 - Felt pads for bumper protection

These clips are Made In The UK, to the highest of standards and ready to use out of the box.

These Clips are designed for the Mercedes A35 front bumper.
Simply remove the existing front facia and use the self tapping screws to screw the cavity mount to your bumper or use the Grey plugs in the facia hole with the self tapping screw and cavity mount.

Tested on roads up to national speed limits and on track at over 140mph. Used for more than 10,000 miles in wind and rain conditions with no loss of grip or movement.

3D printed from a high impact strength plastic that can withstand temperatures of up to 85°C for ultimate durability.

No drilling holes in your current registration plate!

Suitable for all vehicles

Usage and fixing

Using either pre-existing holes with the grey 10mm plug or using the 2 supplied A2 Stainless Steel self-tapping screws, The cavity mounts are attached to the car body or with the grey cavity plugs.

The holder can be secured easily into position by simply placing the holder clip horizontally onto the screwed cavity mount (cavity mount vertical), then rotating the clip to its lock position.

Show plates would need to be of same dimensions for best fitment.

For best fitment it is recommended to check dimensions prior to purchase for no disappointment.  

Refunds will not be given for damage caused by incorrect measurement of plates. 

Any oversize plates can easily be fettled to size, alternatively for undersize plates creating packing similar tape can be used to build to the standard 111mm dimesnsion.

Grillah Parts Technology